How to solve the confusion of warehouse goods stacking

• 作者:
• 来源:
• 日期: 2021-03-13
• 浏览次数: 1178次

The stacking of goods should pay attention to the following aspects:

1. Reasonable partition stacking
1. The connotation of partition stacking
Partition stacking is to see if there is a line on the floor in the warehouse, and whether there is a number after the line is drawn, for example, zone 1, zone 2, zone 3, zone 1 is divided into 1-1, 1-2, and 1-3, which is clear at a glance . Are the zones divided? What items are placed in each zone? Today, what items are placed in Zone 1-1 at Point A. Tomorrow, there may be another item in Zone 1-1. If the area number is fixed, it will be very convenient to find it. .
2. Requirements for reasonable partition stacking
For partition stacking, there is a requirement, that is, the big things do not overwhelm the small ones and the heavy ones do not overwhelm the light ones, that is, put heavy things on the bottom, light things on the top, big things on the bottom, and small things on the top. If there is a shelf, it is unlikely that there will be a problem. However, many domestic companies do not have shelves, so be careful.

Second, firm
The stacking is stable, unbiased, not crooked or falling down. Firmness means being impartial, not crooked or falling down, and the stacking is very stable.

Three, quantitative
The same quantity for each layer, clear number label, convenient inventory and delivery. That is to say, the quantity of each layer should be the same, the different ones are called bulk goods, and there is a special place called the bulk goods area, not with the whole goods. When counting, one, five, one, ten, two, five, thirty, it's clear at a glance, so the same amount should be placed on each layer. Quantitative and clearly marked, there must be a tag inside, what kind of goods this pile of goods, how much quantity, must be clearly marked, in this way, the inventory and delivery speed is very fast.

Four, neat
The warehouses are neat and tidy, viewed vertically in rows and horizontally viewed in rows.

Five, saving
One-time stacking and forming, saving manpower consumption. The saving requirement is one-time stacking and forming without duplication of labor. Take it down and put it in the pallet, and then take it out there. It is best to go directly to the other side with one pallet, one step at a time, one step at a time, saving labor and manpower consumption.

6. Convenience
Warehousing operations such as loading, unloading, handling, inspection and inventory. Convenience must be considered for loading and unloading, handling, inspection, and inventory. Consider whether the current layout and current operation methods are very convenient. Warehousing is not only physically demanding, it also requires brainstorming. For example, when heavy goods are put into the warehouse, they should be placed next to the door, not in the corner, light goods should be placed in the corner, and heavy goods should be placed by the door to facilitate the shipment. Therefore, it is always available everywhere. Bring convenience to your work.